The pair of ISUB TWIN passive subwoofers considerably increases the bass impact of an on-board audio installation, in particular thanks to the heavy and robust double ferrite and aluminum diaphragm speakers. The front grilles promote optimized sound dispersion in the passenger compartment. The installation of these ultra-compact boxes is simple and quick, without modification to the vehicle. They slide easily under the seats* and attach very simply, without tools, using the hook-and-loop straps provided. However, it is very easy to screw them into the floor if you wish. We recommend powering the ISUB TWIN with the Impulse 4.320 amplifier, two channels of which will remain available to connect a pair of speakers in the front doors for example.
RUNNING-IN PERIOD
In order to get the best of your ISUB TWIN speakers, a running-in period must be respected to ensure they are ready for this. We recommend that, once the system is ready for listening, the drive units should be run-in with medium volume setting, with music that has the full bandwidth of frequencies (sub-bass through treble). This running-in period should last for a few weeks, to gain the full potential. After which the excellent performance of your ISUB TWIN kit can be fully appreciated.
Video
Sound Acoustics
Product type : Ultra-compact passive subwoofer
Membrane : Aluminium
Frequency response (+/- 3dB) : 50Hz – 150Hz
Maximum power : 2 x 200 watts
Maximum SPL (peak@1m) : 83 DECIBEL
Motor : Ferrite
Nominal Impedance : 2 Ω
Sensitivity : 83 dB
Suspension material : Butyl
Sound Electronics
Nominal power 100W
Maximum power 200W
Sensitivity 83dB Nom.
impedance 2 Ω
Cone Aluminium Surround Butyl
DC resistance 1.9 Ω
VC diameter 20mm 0.8″
Former Polymide
Layers 4
Wire Copper
Design
Depth : 240 mm
Height : 80 mm
Width : 260 mm
Grilles
Yes
- Special Note -
This product can be powered by the Impulse 4.320 and related harnesses with very easy installation options.