FPX 1.1000
The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel.
- – Mono Class D amplifier
- – Complete range of settings (active crossover, subsonic filter, bass boost, phase control)
- – Stable under 2 Ohms and 1 Ohm
- – Output lines
- – The FPX 1.1000 only measures 1111⁄16 x 513⁄64 x 23⁄32″ (29.7 x 13.2 x 5.3 cm).
FOCAL FPX 1.1000 KEY FEATURES
- Mono Class D amplifier
- Complete range of settings (active crossover, subsonic filter, bass boost, phase control)
- Stable under 2 Ohms and 1 Ohm
- Output lines
COLOSSAL POWER FOR SUCH A COMPACT CHASSIS
Very compact and easy to integrate, the FPX 1.1000 amplifier has been specifically developed for powering all types of subwoofer. It is stable at 4 Ohms, 2 Ohms and 1 Ohm, delivering a respective power of 420, 700 and 1000 Watts RMS. Whether it’s for an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs.
It features all the settings you’d expect to find in such an efficient bass amplification system: adjustable low-pass active crossover with a slope of 24 dB, subsonic filter with a slope of 24 dB, bass boost and phase control.
The FPX 1.1000 comes supplied with a remote control for controlling the bass from the dashboard, and a pair of output lines for hooking up a second amp. This is especially useful for setting up a bass channel with two subwoofers and two amplifiers.
POWERFUL BASS
Compact and easy to integrate into the vehicle, this Class D amplifier is designed to drive all types of subwoofers. Stable at 4, 2 and 1 ohms, it delivers 420, 700 and 1000 watts RMS power respectively. It features all the settings required for a highly efficient amplifier.
HEAT DISSIPATION
For a powerful, musical amplifier, heat dissipation is essential. That’s why FPX amplifiers are built on thick aluminum frames with optimal cooling capacities.
MULTIPLE INSTALLATIONS
The FPX 1.1000 has a remote control for bass level control from the front of the vehicle, and a pair of line outputs for distributing the sound signal to a second amplifier. This feature is ideal for creating a bass channel with two subwoofers and two amplifiers.
Sound Acoustics
- D Class Mono amplifier
- CEA power (4 ohms): 1×420 Wrms
- Maximum power (2 ohms): 1×700 Wrms
- Maximum power (1 ohm): 1×1000 Wrms
- Bandwidth: 15 Hz – 250 Hz
- Total harmonic distortion: 0.08 %
- SNR (1W/A):> 76 dBA
Sound Electronics
- Subsonic filter 10Hz-50Hz (24dB/oct)
- High-pass/low-pass filter
- Low-pass 50Hz-250Hz (24dB/oct)
- Bass boost 0 to 12dB linear Phase 0 to 180° linear
- Standby current (A) 1.75 A
- Remote control ✓
- Protections Short circuit/low impedance/ reverse polarity/dC/voltage drop/overheat protection
Design
- Dimensions (LxHxW): 297 x 132 x 53 mm
- Weight: 2.55kg